Basic Hydraulics 2011-2012

Basic Hydraulics 2011-2012

Wednesday, 15 February 2012

Basic \hydraulics - module 3 -Activity 1

1-  Non - return valves:

Non-return valves are used to block the flow in one direction and allow free flow in the other direction.
Three figures below show three types of non- retun valves, name each one and state its function.
Posted by at

33 comments:

  1. MOHSEN MOHAMMED 11-4Wednesday, 15 February, 2012

    shut off valve:
    close and open the flow

    check valve:
    alow for one direction

    pilot check :
    allow the flow only in one direction from port (A) to port (B), and also allows the flow in the opposite direction only when the port (x) has a pilot signal

    ReplyDelete
  2. Firas Mohammed 11-04Wednesday, 15 February, 2012

    Non-return valve.
    Check valve.
    Pilot check valve.

    ReplyDelete
  3. Ahmed Saleh 11-04Wednesday, 15 February, 2012

    1- shut off valve
    is a manually opened or closed valve
    2- check valve
    It used to allow the flow only in one direction
    3- pilot check valve
    is to allow the flow only in one direction from port (A) to port (B), and also allows the flow in the opposite direction only when the port (x) has a pilot signal.

    ReplyDelete
  4. ahmed khalifa 11-04Wednesday, 15 February, 2012

    on the top: shut off valve, closed and open manually
    on the bottom: check valve,used to allow the flow only in one
    direction and it will be closed completely in the opposite direction
    on the right: pilot check valve, it will allow the flow from A TO B and it will allow the flow in the opposite direction if it received signal from port x

    ReplyDelete
  5. adel salem joher 11.04Wednesday, 15 February, 2012

    1.Shut off valve. (manually opened or closed valve)
    2.Pilot Check valve.(is to allow the flow only in one direction from port (A) to port (B).
    3.Check valve (Non-return valve) (allow the flow only in one direction)

    ReplyDelete
  6. mohammed khalid alamiri 11-04Wednesday, 15 February, 2012

    1- Non - return valves:
    used to block the flow in one direction and allow free flow in the other direction.

    2- Check valve (Non-return valve)
    It used to allow the flow only in one direction.

    3- Pilot Check valve
    allow the flow only in one direction from port (A) to port (B).

    ReplyDelete
  7. OmarMoosa11.04Wednesday, 15 February, 2012

    1- Shut off valve :
    - a manually opened or
    closed valve
    2- Check valve :
    - allow the flow only in one
    direction
    3- Pilot Check valve :
    - allow the flow only in one direction from
    port (A) to port (B)

    ReplyDelete
  8. ali mohammed alamiri 11/4Wednesday, 15 February, 2012

    1;1- Non - return valves/used to block the flow in one direction and allow free flow in the other direction.
    2;Check valve (Non-return valve)/used to allow the flow only in one direction; which means that the flow in the opposite direction will be completely blocked.
    3;1-2 Pilot Check valve/is to allow the flow only in one direction from port (A) to port (B), and also allows the flow in the opposite direction only when the port (x) has a pilot signal.

    ReplyDelete
  9. abdulrahman mohammed abdulla 11-4Wednesday, 15 February, 2012

    1 - Non return valves , block the flow
    in one direction and allow in the other direction

    2- Check valve , allow the flow only in one
    direction which mean in the other direction it will be blocked completely.

    3- Pilot Check valve , allow the flow in one direction from port A to B and also allow in the opposite direction.

    ReplyDelete
  10. Abdulaziz AbdulrahmanWednesday, 15 February, 2012

    Shut off valve:is a manually opened or
    closed valve.

    Check valve (Non-return valve):It used to allow the flow only in one direction.

    Pilot Check valve:is to
    allow the flow only in one direction from
    port (A) to port (B), and also allows the
    flow in the opposite direction only when the
    port (x) has a pilot signal

    ReplyDelete
  11. yasser ibrahimWednesday, 15 February, 2012

    1-Shut off valve
    The shutoff valve is a manually opened or
    closed valve.

    2-Pilot Check valve
    The function of the pilot check valve is to
    allow the flow only in one direction from
    port (A) to port (B), and also allows the
    flow in the opposite direction only when the
    port (x) has a pilot signal.

    3-Check valve (Non-return valve)
    It used to allow the flow only in one
    direction; which means that the flow in the
    opposite direction will be completely blocked.

    ReplyDelete
  12. Rashed Abdulla almazem-11.04Wednesday, 15 February, 2012

    Non - return valves:Non-return valves are used to block the flow
    in one direction and allow free flow in the
    other direction

    Shut off valve:The shutoff valve is a manually opened or
    closed valve.

    Pilot Check valve:allow the flow only in one direction from
    port (A) to port (B), and also allows the
    flow in the opposite direction only.

    ReplyDelete
  13. asdaSAsdfWednesday, 15 February, 2012

    xcv \sdcasfasf

    ReplyDelete
  14. yousef bedwawi 11-04Wednesday, 15 February, 2012

    The shutoff valve is a manually opened or closed valve

    check value It used to allow the flow only in one direction; which means that the flow in the opposite direction will be completely blocked.

    pilot check valve The function of the pilot check valve is to allow the flow only in one direction from port (A) to port (B), and also allows the flow in the opposite direction only when the port (x) has a pilot signal.

    ReplyDelete
  15. hdido0oWednesday, 15 February, 2012

    1-Shut off valve

    The shutoff valve is a manually opened or
    closed valve

    2-Check valve (Non-return valve)
    It used to allow the flow only in one
    direction

    3-Pilot Check valve
    The function of the pilot check valve is to
    allow the flow only in one direction from
    port (A) to port (B)

    ReplyDelete
  16. hdido0oWednesday, 15 February, 2012

    1-Shut off valve

    The shutoff valve is a manually opened or
    closed valve

    2-Check valve (Non-return valve)
    It used to allow the flow only in one
    direction

    3-Pilot Check valve
    The function of the pilot check valve is to
    allow the flow only in one direction from
    port (A) to port (B)

    ReplyDelete
  17. Saud Hussain Ahmed 11-01Thursday, 16 February, 2012

    Check Valve: it will allow the flow in one direction and close the flow in the other direction

    Pilot Check Valve:it will allow the flow in one direction and you can give signal to port x and the flow will change to the other direction

    Shut off Valve:it is manually opened or closed

    ReplyDelete
  18. Omran Abdulla 11-01Thursday, 16 February, 2012

    Pilot Check valve : it will allow the Oil to flow in both direction A-B and B-A if a single was given to port X.

    Shut off Valve : a Manually Opened and Closed Non Return Valve.

    Check Valve : a One way Flow Control Valve with a a Ball inside to block the other way.

    ReplyDelete
  19. Eisa Hasan 11-01Thursday, 16 February, 2012

    Shut off valve
    it use to block the flow in one direction

    Check valve
    it allows the flow in one direction

    Two way flow control valve
    provides a constant flow rate

    ReplyDelete
  20. Mohammed Darwish MohammedThursday, 16 February, 2012

    Shut off valve: is used to provide a means of on/off flow control in the circuit.

    Check valve: is used to allow the flow only in one direction.

    Pilot Check valve: It allow the flow only in one direction and also allows the flow in the opposite direction only when the port (x) has a pilot signal.

    ReplyDelete
  21. Azzan AlnoobiThursday, 16 February, 2012

    1-Shut off valve: He is manually open or close valve.

    2-Check valve (Non-return valve): It make the flow in one direction.

    3-Pilot Check valve: It make the flow in one direction from port (A) to port (B) and also allows the flow in the opposite direction only when the port (x).

    ReplyDelete
  22. Sultan Mohammed 11-04Wednesday, 22 February, 2012

    1- Shut off valve : manually opened or
    closed valve
    2- Check valve : allow the flow only in one
    direction
    3- Pilot Check valve : allow the flow only in one direction from
    port (A) to port (B)

    ReplyDelete
  23. abdulaziz alghazali 11-04Wednesday, 22 February, 2012

    @_Shut off valve: it is controls manually(open / closed )

    @_Check valve: it allow the oil to flow in one direction

    @_Pilot Check valve: a One way Flow Control Valve with a a Ball inside to block the other way.

    ReplyDelete
  24. ammar obaid .. 11_04Wednesday, 22 February, 2012

    1- shut off valve : used to close the oil flow in one direction

    2- Pilot Check valve : it allowed the oil to flow only in one direction

    3- Check valve or Non-return valve : it allowed the oil to flow in one direction while blocking the opposite direction

    ReplyDelete
  25. Sultan Saif AlDoobi 11-01Thursday, 23 February, 2012

    1;1- Non - return valves/used to block the flow in one
    direction and allow free flow in the other direction.

    2;Check valve (Non-return valve)/used to allow the flow only in one direction; which means that the flow in the opposite direction will be completely blocked.

    3;1-2 Pilot Check valve/is to allow the flow only in one direction from port (A) to port (B), and also allows the flow in the opposite direction only when the port (x) has a pilot signal.

    ReplyDelete
  26. S.Ibrahim Mustafa 11.01Thursday, 23 February, 2012

    1. Shut off valve: Its used to block the flow from one direction.

    2. Check valve: Its used to allow fluid to flow in one direction and blocks the other direction.

    3. Pilot check valve: Its used to allow the fluid to flow from port A to P, but if port X gets a signal it will reverse the flow.

    ReplyDelete
  27. Mohammed Ismail_11-01Thursday, 23 February, 2012

    1) Check Valve: it will allow the flow in one direction and close the flow in the other direction.

    2) Pilot Check valve : it will allow the Oil to flow in both direction A-B and B-A if a single was given to port X.

    3) shut off valve : used to close the oil flow in one direction.

    ReplyDelete
  28. abdulrahman ahmad alraisi 11-01Thursday, 23 February, 2012

    1/ shut off valve: it stops the flow of fluid in one direction

    2/ check valve: (non-return valve) It allows the flow of fluids only in one direction

    3/Pilot Check valve: it allows fluids to go through port A to B the direction can be changed if port X is used

    ReplyDelete
  29. 11.01 Yousif Hussain AlsarkalThursday, 23 February, 2012

    1- Shut off valve can controls manually : open and close
    2- Pilot Check valve its allowed the flow only in one direction

    3- Check valve or Non-return valve its allowed the oil to flow in one direction only

    ReplyDelete
  30. Ahmad Ibrahim 11.01Thursday, 23 February, 2012

    1. the shutoff valve: is a manually opened or closed valve.

    2. Check valve (non-return valve):It used to allow the flow only in one direction; which means that the flow in the opposite direction will be completely blocked.

    3. Pilot check valve: The function of the pilot check valve is to allow the flow only in one direction from port (A) to port (B), and also allows the flow in the opposite direction only when the port (x) has a pilot signal.

    ReplyDelete
  31. Abdullah AbdulrzzaqThursday, 23 February, 2012

    1-shut off valve we use it to look one direction.



    2-pilot check valve use it for control the direction of oil


    3-check valve or non-return valve : when the oil go throw it but it can't back throw it.

    ReplyDelete
  32. 11.01 sultan mohammedSaturday, 10 March, 2012

    1. the shutoff valve: is a manually opened or closed valve.

    2. Check valve (non-return valve):It used to allow the flow only in one direction; which means that the flow in the opposite direction will be completely blocked.

    3. Pilot check valve: The function of the pilot check valve is to allow the flow only in one direction from port (A) to port (B), and also allows the flow in the opposite direction only when the port (x) has a pilot signal.

    ReplyDelete
  33. salim ibrahim 11-01Monday, 12 March, 2012

    check valve: it allow the oil to flow just in one direction

    shutoff valve: open or closed the circuit

    Pilot check valve: it allow the oil to flow just in one direction and you can change the flow direction by sending signal to port x

    ReplyDelete

Subscribe to: Post Comments (Atom)